PC Card Solutions >>> Industrial Products >>> Internal Devices  
FAQ  |   Company   |   Terms   |   Site map     
Home PC Card Solutions Moisture Analyzer Mass Flow/Moisture for Solids Temperature Measurement Online Store Contact Us

Industrial Products | Home/Small Office | Adapters | PC Cards | CAN Bus

Temperature Transmitter | Humidity Transmitter | Measurement Devices | RTD Elements/Sensor


• Industrial Products



  OMNIDriveUSB Pro Int
  OMNIDrive Pro Int



• Home/Small Office

• Adapters

• PC Cards

• CAN Bus

OMNIDriveUSB PRO Intern (P/N 20541)  
  Universal Internal PC Card Drive for USB Port

  • Internal PC Card drive for USB
  • Windows device driver for ATA Flash, ATA HDD,
    CF, Linear Flash, SRAM
  • Linux support of ATA Flash, ATA HDD, CF
  • Easy installation and handling Win 98/Me, 2000, XP, Linux
  • Optimized USB 1.1 data transfer
    Transfer rate up to 1MByte/S
  • USB Cable with connector for PC mother board
  • Option:-40� to 85�C operating temperature

OMNIDriveUSB Pro Intern is a drive in a 3.5" frame for all kinds of Memory Cards complying with the PC Card standard. This includes ATA Flash Cards, ATA Hard Disks, CompactFlash Cards with adapter, Linear Flash Cards and SRAM Cards.

Windows Software Support

Included is also our powerful windows tool PC Card Manager software utility which allows for:
  • Flexible DOS Format Utility
  • Hex Editor and Binary Data Copy Utility
  • Inspect and Repair Tool for ATA media

Especially for OEM and system integrators is our optional Software Development Kit (SDK) which allows for direct access to PC Cards from within a customer-specific application.

Linux Software Support

Under Linux OMNIDrive USB Pro intern is usable as a plug and play drive for ATA memory media. Here are the device drivers of Linux used.

Perfect for Industrial PC's

Unlike other internal drives OMNIDriveUSB Pro Intern allows a cable length of 2m or more. It can be installed in terminals seperated from the PC main boad. Custom OEM cable solutions are alaso possible.

Easy Installation

OMNIDriveUSB Pro Intern requires no internal alot like other internal drives and can be used independently of PC bus (ISA, PCI, ec.). Instead the device is connected to a free USB port on the PC mother board. OMNIDrive receives its power supply through the USB port and optional through an additional 4-pin connector for 3.5" floppy drives.


OMNIDriveUSB Pro Intern
PC Card slots: 1 slot type II at front
Interface: USB 1.1 (12 MByte/S)
Transfer rate: up to 1 Mbyte/s
PC Card types: ATA Flash, ATA Hard Disk,
CompCompactFlash with adapter, SRAM¹ , Linear Flash ¹ ²
Software: CSM Professional software for windows with utilities:
PC Card Manager (PCM), OMNICtrl, BCPY32, CSMFORM
Dimensions: L: 128 mm W:101.5 mm H: 25.5 mm (5.12" x 4.06" x 1.02")
Weight: approx. 250 g
Operating temperature: 0 �C to +70 �C ³ (32�F to 158�F)
Non-operating temperature: -20 �C to +85 �C ³ (-4�F to 185�F)
Humidity: max. 90 %, non condensing
Power supply: 5 V from USB Port, additional 4-pin connector for 3.5" floppy drives
System requirements: PC compatible, Windows 98/Me, Win 2000, Win XP or LINUX

¹ Usage of SRAM and Linear Flash under Windows.
² AMD, Catalyst, Fujitsu, Intel Series 1, 2, 2+, StrataFlash a.o. Others on request.
³ Optional -40 �C to +85 �C (operating and non-operating)
Go to top
FAQ Company Terms Site map
Copyright © 1992-2013 I.P.I. International Products, Inc.