PC Card Solutions >>> Industrial Products >>> Embedded Systems  
FAQ  |   Company   |   Terms   |   Site map     
Home PC Card Solutions Moisture Analyzer Mass Flow/Moisture for Solids Temperature Measurement Online Store Contact Us

Industrial Products | Home/Small Office | Adapters | PC Cards | CAN Bus

Temperature Transmitter | Humidity Transmitter | Measurement Devices | RTD Elements/Sensor


• Industrial Products




  1.8" IDE FlashModule
  DOS-Drive Module
  DOS-Drive CAN
  DOS-Drive 3964R


• Home/Small Office

• Adapters

• PC Cards

• CAN Bus

1.8" IDE FlashModule  
  Extremely Small PC Card Reader for IDE Interface

  • Replacement for IDE hard disk
  • Fast, up to 400 KB/s write access
  • 3.3 Volt / 5 Volt Power Supply
  • Removable CompactFlash Card
  • Metal Clip holds Card Firm in Place
  • Temperature Range -40�C to +85�C
The 1.8" IDE FlashModule is ideal for mobile systems as a low-cost replacement for mechanical hard drives. It features a very small design, low power consumption, noise-free and service free operation.

The 1.8" IDE FlashModule is equipped with a standard 44-pin (2mm raster) IDE interface connector. This ensures compatibility with existing 1.8" hard drives and FlashDrives.


1.8" FlashModule for IDE Interface
PC Card: CompactFlash
Interface: IDE, 44-pin, 2mm raster (optional: 40-pin, 2.54mm raster)
Access: Random Access, 512 Byte Blocks
Data Bus: 8 Bit/ 16 Bit
Transfer Speed: up to 400 KB/S
Write Cycles: min. 300,000 each sector
MTBF: > 1,000,000 h
Dimension: L: 76.2 mm, W: 50.8 mm, H: 10.2 mm (3"x2"x0.4")
Power Supply: 5V or 3.3V
Power Consumption: sleep: max. 500 �A (5 V)
write: max. 90 mA (5 V)
Operating temperature: 0 �C to +60 �C (32�F to 140�F)
optional -40�C to +85�C (-40�F to 185�F)
Humidity: max. 95 %, non condensing
Go to top
FAQ Company Terms Site map
Copyright © 1992-2013 I.P.I. International Products, Inc.